USB Powered 10M Dream Chasing Flagpole Led Light String, Remote, Button or App Controlled

Advanced "Dream Chasing" (WS2812 IC)

Because this light uses the WS2812 built-in IC, every single one of the 100 LEDs is "smart."

• Total Control:Most lights change colour as a whole; these allow each LED to be a different colour simultaneously.  

• 16 Million Colours: Using the Magic-Lantern App, you can DIY your own sequences, from slow "breathing" fades to high-energy "chasing" rainbows.

• Music Sync: The USB controller features a built-in microphone, allowing the 10 meters of light to pulse and dance in perfect synchronization with your music or ambient sound.

Triple-Control Interface

You have three ways to manage your light show, ensuring you're never stuck if you lose the remote or your phone dies:

1. Bluetooth App (Magic-Lantern): The most powerful option. Use it for timers, grouping multiple sets together, and granular colour picking.

2. 24-Key IR Remote: Ideal for guests or quick changes to brightness and speed.

3. USB Controller Button: A simple physical button on the USB plug for quick mode cycling.

Strategic Setup: The 3-Meter Advantage

The 3-meter lead wire is a critical upgrade for flagpole and awning users:

• The Dry Zone: The USB plug and controller are not waterproof. This 3-meter lead allows you to plug into a power bank inside your vehicle, tent, or caravan, and run the "cold" wire out to the display.

• The Wet Zone: The actual 10-meter string is IP68 rated (the highest level of protection). It can handle heavy rain, snow, and total submersion without failure.

Flagpole & Awning Installation Tips

To keep your 10-meter string in perfect condition, follow these mounting rules:

• The "Soft-Touch" Rule: As emphasized, never use plastic zip ties. The PVC coating is durable but can be pinched or cut by hard plastic edges in high winds. Use Velcro ties or Insulation Tape to allow the light to move naturally with the wind.

• Shape Memory: Because this is a string/rope style rather than a flat tape, you can wrap it tightly around poles, weave it through handrails, or even fold it into shapes.

• Powering Up: Since this is a 5V system with 100 LEDs, use a high-quality USB port (ideally 2A or higher) to ensure the colours stay vibrant at the very end of the 10-meter run.

Technical Summary